|The ShurLok operates on a patented
system of two groups of combinations. One combination opens the shackle
(factory setting on 0-0-0-0) and the second combination opens the
sliding key storage door (factory setting on 3-3-3-3). To set your
combination at any time, follow the instructions below.
- Set dials to shackle combination
(new lock comes with factory setting on 0-0-0-0). Dials
must be set to current shackle code in order to make any combination
changes. Open shackle (to insure you are on the correct shackle
- Use a paper clip, small screwdriver or dime to turn the change
screw button located above the key compartment. Turn the screw clockwise 90 degrees (1/4 turn). Never force the change
If it is difficult to turn - STOP - make sure the numbers are lined up and
that you have the correct combination for the shackle, not the key
- Turn the dials to the numbers of the new shackle combination
that you have selected. Record your new combination in a safe place. The sliding door combination is
automatically set when the new shackle combination is set. Follow
the chart below to find the new combination for the sliding door.
- Return the change screw to the original
position by turning counter-clockwise 90 degrees (1/4 turn). Open &
close shackle. Dial in the new key door combination & open & close
key door. Your ShurLok is now re-set.
- If you wish to have the key compartment combination be a
specific number, then use the chart below to determine what the
shackle combination would be. That is the number that you would
reset on the lock. You do not set the
combination of the key compartment.
For pictorial instructions, click